The very last post is what tipped me over the edge the steps that i took before that was to manually configure xorg.conf which supposedly does not get read in Xubuntu DRI still isn't enabled though and glxinfo | grep render shows direct rendering: No OpenGL renderer string: Mesa GLX Indirect I have attached the outputs for lspci, dmesg | grep r128, Beyond that, check your Xorg.0.log; midway through it goes through the resolutions and decides which ones fit the refresh rates of the monitor. I had to redo the entire X server and now I have set the driver to r128 and the monitor at a 16 bit depth with the resolution at 1280x1024 Success http://tbapplication.com/ati-mobility/ati-mobility-radeon-9000-driver-ubuntu-12-04.html
Parity of sum of other elements How did the word "Bollywood" originate? 'A' to Ä converter EM algorithm: Why do we compute the expectation with respect to the conditional distribution? Add tags Tag help Daniel Holbach (dholbach) on 2006-02-24 Changed in xorg: status: Unconfirmed → Rejected menny (menny-evendanan) wrote on 2006-02-25: Re: [Bug 29970] ATI mobility AGP resolution #1 Why was This should greatly help power consumption, especially when idle. Report a bug This report contains Public information Edit Everyone can see this information. anchor
Testing the driver To look for boot messages/errors, check dmesg | egrep 'drm|radeon'To see your OpenGL information, you can run the commands below. Finally, in theory -ati should run fine with no xorg.conf present. I have tried both of those suggestions and there isn't any drivers listed at all for my machine, and I am not able to improve the resolution beyond 800x600, or 640x480
up vote 1 down vote favorite I am quite confident under hardy I only had to change the color depth to 16, although I can't remember which driver (ati, r128, fglrx) As an alternative, you can install a newer release of Ubuntu. Glad to hear you got it all sorted out and on behalf of the rest of the staff here we hope you stick around. This generally solves the problem.
Believe it or not I really do not like the way I look in almost every sense. This is not true, i'm tweaked it a bit, according to an HOWTO about dual head. You can safely take away your /etc/X11/xorg.conf and your computer should run fine. you could try here If you are interested, I have resolved the problem adding this code in my xorg.conf, section Device of my ati video: [....] Section "Device" Identifier "ATI Technologies" Driver "ati" BusID "PCI:1:0:0"
ubuntu rage mobility m3 [ubuntu] ATI Rage mobility M3Have a Dell C600, installed Ubuntu 9.04, graphics are 800x600, should be much better Not completely familiar with that ATI card. kernel Linux 3.13.0-xx-generic, look at the 14.04 column. Entry deleted from font path. (**) FontPath set to "/usr/share/X11/fonts/misc,/usr/share/X11/fonts/100dpi/:unscaled,/usr/share/X11/fonts/75dpi/:unscaled,/usr/share/X11/fonts/Type1,/usr/share/X11/fonts/100dpi,/usr/share/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Rage Mobility M3 AGP 2x" Driver "ati" BusID "PCI:1:0:0" VideoRam 8192 EndSection Section "Monitor" Identifier "NU" Option "DPMS" HorizSync 31-101 VertRefresh 60-160 # UseModes "Modes" EndSection Section "Monitor" Identifier "Laptop LCD"
Is there something I have to add to the Monitor section of xorg.conf perhaps? Identifying your graphics card or APU First, check your graphic card name and chipset: sudo update-pciids #optional command, requires internet lspci -nn | grep -E 'VGA|Display'It should report something like this If M is selected, the module will be called r128. Related 6How to change the screen resolution for the GDM login screen?3How do I force a resolution of 1024x768?1How do I set the resolution with a Diamond ATI Radeon 9550?1How to
file Open it to edit, change the defaultdepth 24 to 16 .... his comment is here Tell Ubuntu to reinstall the Xorg server and all its modules and pull in the latest 686 kernel. -drasnor 0 nonstop301 51° 27' 24.87" N // 0° 11' 38.91" W Member I have only 1 monitor. Affecting: xorg (Ubuntu Dapper) Filed here by: menny When: 2006-01-29 Assigned: 2006-01-29 Package (Find…) Status Importance Invalid Medium Assigned to Nobody Me Comment on this change (optional) Email me about changes
Did you pull drm off of the web or install through one of Ubuntu's repositories? How do I bend EMT conduit to a broader radius? This is because whereas X used to be responsible for selecting resolution, these days the kernel does it. (This is called Kernel Mode-Setting, or KMS). http://tbapplication.com/ati-mobility/ati-mobility-firegl-v5700-ubuntu-driver.html Not the answer you're looking for?
After this you must restart the X server > with ctrl-alt-backspace or /etc/init.d/gdm restart. > > Aloha! > > -- > ATI mobility AGP resolution > https://launchpad.net/bugs/29970 > See full activity AGP support for this card is strongly suggested (unless you have a PCI version). It can be done with the following command: echo "options radeon audio=1" | sudo tee /etc/modprobe.d/radeon.confUbuntu Precise/12.04 users should also note that they may need a newer kernel (>= 3.5.x) to
Navigation: Linux Kernel Driver DataBase - web LKDDB: Main index - D index CONFIG_DRM_R128: ATI Rage 128 General informations The Linux kernel configuration item CONFIG_DRM_R128 has multiple definitions: ATI Rage 128 If it's not working right, look at /var/log/Xorg.0.log and figure out why. Rage Mobility M3 Resolution Problems?. [Xubuntu][Intrepid] wrong resolution with. [Opgelost]Schermrelolutie aanpassen - Ubuntu Nederlands ...Buenas tardes a todos, disfruto de Feisty corriendo en una máquina Compaq Presario 1800, PIII a 1 Aceleración gráfica Ati Rage Mobility M3. [Xubuntu][Intrepid] wrong resolution with.
Affecting: xorg (Ubuntu Breezy) Filed here by: menny When: 2006-01-29 Assigned: 2006-01-29 Package (Find…) Status Importance Invalid Medium Assigned to Nobody Me Comment on this change (optional) Email me about changes If M is selected, the module will be called r128. Do you think I should pick up the rage128 snapshot that is listed there as well ? navigate here Now this isn't me ne… Thrax Professional Shill, Pokémaster, Watch Slut, Mumble Hivemind Drone Austin, TX 12:07AM Found the perfect phone for you, Meray https://www.xda-developers.com/jelly-is-a-2-45-smartphone-that-runs-android-nougat/ Finally, an Android phone that's small
If M is selected, the module will be called r128. Anyway here are some commands to run through first. If you don't know, open up a terminal window and type 'sudo lsmod | grep -i ati', 'sudo lsmod | grep -i radeon', and 'sudo lsmod | grep -i fglrx'. Rage Mobility M3 AGP 2x" Driver "ati" BusID "PCI:1:0:0" VideoRam 8192 Option "AgpMode" "2" Option "EnablePageFlip" "true" Option "Accel" "true" EndSection Section "Monitor" Identifier "Generic Monitor" Option "DPMS" HorizSync 28-70 VertRefresh
menny (menny-evendanan) wrote on 2006-05-22: Re: [Bug 29970] Re: ATI mobility AGP resolution #9 Thanks dexxter! Welcome to Short-Media! -drasnor 0 kbidwell Jun 2007 edited Jun 2007 nonstop301 wrote: Got it working drasnor and you were right. If your X server fails to fire, please post any errors it generates along with a copy of the output from 'lspci'. -drasnor 0 nonstop301 51° 27' 24.87" N // 0° kernel Linux 3.2.0-xx-generic, look at the 12.04 column.
Automaticly set to 640x480 on 65Hz. Rage Mobility M3 AGP 2x" Monitor "Generic Monitor" DefaultDepth 16 SubSection "Display" Depth 1 Modes "1400x1050" EndSubSection SubSection "Display" Depth 4 Modes "1400x1050" EndSubSection SubSection "Display" Depth 8 Modes "1400x1050" EndSubSection After this you must restart the X server with ctrl-alt-backspace or /etc/init.d/gdm restart. If it comes back fglrx then you're using the ATI binary driver and we may be able to finagle it to work. -drasnor 0 nonstop301 51° 27' 24.87" N // 0°
Sign in to continue to Docs Enter your email Find my account Sign in with a different account Create account One Google Account for everything Google About Google Privacy Terms Help I'll try this as soon as possible. but it works) it indicates I have a ATi Mobility M3 2x (AGP) as Identifier. Power Management Ubuntu 12.04.5 LTS (Linux kernel 3.13.0), Ubuntu 14.04 LTS and later For the most recent ATI/AMD graphic cards supported by the Radeon driver, DPM (Dynamic Power Management) should work
I am not very savvy with PC's so please explain in plain terms. Rage Mobility M3 AGP 2x" Monitor "Generic Monitor" DefaultDepth 16 EndSection Section "DRI" Mode 0066 EndSection # # #Section "Device" # Identifier "Configured Video Device" #EndSection # #Section "Monitor" # Identifier AGP support for this card is strongly suggested (unless you have a PCI version).