Instead if you notice overheating problems and/or you have an old Radeon HD graphic card, you can enable DPM by adding a boot parameter. In this case, and when your card supports it, you can change the fan speed manually. It might happen that you will need to go to root shell in recovery if some option or syntax error made your X server not loadable. It is possible, however, to enable KMS during the initramfs stage. have a peek here
Tuning I couldn't find a summary of all options available so feel free to add to this. Use this guide for your own sake. Contents 1 Installation 1.1 Prerequisites 1.1.1 Hardware detection 1.1.2 Feature support 1.2 Kernel 1.2.1 General 1.2.2 AGP 1.2.3 Audio 1.3 Firmware 1.3.1 linux-firmware 184.108.40.206 USE flags 220.127.116.11 Emerge 1.3.2 radeon-ucode 18.104.22.168 So with that said you if you only have one HDMI port it should be DPF1 for the spefic card the HDMI port is for. https://wiki.archlinux.org/index.php/ATI
To know which version of the Linux kernel you have installed, type this text in a terminal window: uname-r In Ubuntu 12.04 LTS with the 3.2.0-xx-generic Linux kernel, you might encounter Check the manpage of the Radeon driver for advanced options. I run Ubuntu 10.10. –jfmessier Dec 2 '10 at 1:54 1 I just noticed yesterday that it no longer works on 10.10 (though it did on 10.04, I believe).
If you pressed
Code: dmesg | grep drm If it is not, then stop reading this article here and go to radeonBuildHowTo#radeon-KMSissues It will be quite difficult for a very beginner but you can If you have Ubuntu 14.04 LTS with Linux kernel 4.4.0 (HWE stack Xenial), you can't install the proprietary fglrx/Catalyst driver. If reverting back to the original xorg.conf file does not work for whatever reason and you are stuck in the terminal, you can execute the following command: sudo dpkg-reconfigure -phigh xserver-xorg https://wiki.debian.org/ATIProprietary So I hope you got it!
linux-firmware USE flags USE flags for sys-kernel/linux-firmware Linux firmware files savedconfig Allows individual selection of firmware files local Data provided by the Gentoo Package Database Last update: 2017-04-24 08:02 Note:In Ubuntu 10:10 Hardware Drivers is now named Additional Drivers More Detailed Installation Instructions Here are some useful links and related pages. See "How to install the linux-firmware package in Gentoo" in External resources at bottom of this article. Basic Installation Instructions The easiest way to install binary drivers is to use the built in Hardware Drivers manager in Ubuntu.
Section "Screen" The one with Screen0 and Monitor0 in it Learn by HEART essential Commands and Places Places Two main places to remember: Code: /var/log Here you will find different logs I don't remember current status of RandR support for multiple GPUs but my guess is that you are getting results from the first GPU, which is probably the HD4250 with the For Ubuntu 16.04 LTS with Linux kernel 4.4, AMDGPU-Pro hybrid driver is also available to download here (please read the release notes for known problems and limitations). It can be activated by simply running the following command: # echo dynpm > /sys/class/drm/card0/device/power_method Profile-based frequency switching This method will allow you to select one of the five profiles (described
Another one is a kernel patch removing the pixel clock limit, but this may damage the card! navigate here Does taxiing time gets considered in a pilot's flying hours? Performance tuning Enabling video acceleration See Hardware video acceleration. Another solution is to enable the pulseaudio USE flag, update the system and use pavucontrol to set the HDMI port as fallback (or use pavucontrol to change manually which application uses
In terminal run command Code: sudo X -configure You might get an error saying something like: Fatal server error: Server is already active for display 0 If this server is no Just one more thing you should be able to setup your BIOS to your desired Display Adapter just another resort you can try as well then just need too run the Kernel parameters Tip: You may want to debug the new parameters with systool as stated in Kernel modules#Obtaining information. http://tbapplication.com/ati-driver/ati-driver-xorg-1-6.html TV showing a black border around the screen Note: Make sure the tv has been setup correctly (see manual) before attempting the following solution.
Setting the radeon.dpm=1 kernel parameter will enable dpm. Unlike dynpm, the "dpm" method uses hardware on the GPU to dynamically change the clocks and voltage based on GPU load. Before you start modifying xorg.conf It is important to know what the capabilities of your hardware is before you start.
Install the xf86-video-ati package. The approach to getting Twin View or two monitors working in Ubuntu is much the same as getting a low resolution monitor working as described above. Normally, you should not get problems with KMS, if you got one then you probably already tried to configure your X or made some mistake in configuration. I believe aticonfig changes both xorg.conf and amdpcsdb as needed.
Content is available under GNU Free Documentation License 1.3 or later unless otherwise noted. This protects against overscanning (see Wikipedia:Overscan), but can be turned off using xrandr: xrandr --output HDMI-0 --set underscan off Black screen and no console, but X works in KMS This is Know Your System Before you start gather required information System Specifications Sony VAIO E series VPCEB1S1E Processor: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz Code: cat /proc/cpuinfo Video Card: ATI this contact form ATI X1600 (RV530 series) 3D application show black windows There are three possible solutions: Try adding pci=nomsi to your boot loader Kernel parameters.
See the decoder ring to translate marketing names (e.g. Ubuntu Forums - Ask your questions here.