Home > Ati Driver > Ati Driver Xorg 7.4

Ati Driver Xorg 7.4

If this driver is not installed, Xorg Server will print a warning on startup, but it can be safely ignored if hardware specific driver works well. This package is known to build and work properly using an LFS-7.4 platform. Package Information Download (HTTP): http://xorg.freedesktop.org/archive/individual/driver/xf86-video-r128-6.9.1.tar.bz2 Download (FTP): ftp://ftp.x.org/pub/individual/driver/xf86-video-r128-6.9.1.tar.bz2 Download MD5 sum: 99299cbf45abfd86e21b34eb4217d6f5 Download size: 460 KB Estimated disk space required: 5.5 MB Estimated build time: less than 0.1 SBU Xorg R128 Get the one that corresponds to your wanted resolution, and copy-paste it into kernel line of your bootloader, so it could look like ie. Check This Out

libvdpau-0.7 Introduction to libvdpau The libvdpau package contains a library which implements the VDPAU library. Package Information Download (HTTP): http://xorg.freedesktop.org/archive/individual/driver/xf86-video-fbdev-0.4.3.tar.bz2 Download (FTP): ftp://ftp.x.org/pub/individual/driver/xf86-video-fbdev-0.4.3.tar.bz2 Download MD5 sum: 1d99f1dfb3f0fea077b6b61caa3dc85a Download size: 284 KB Estimated disk space required: 2.3 MB Estimated build time: less than 0.1 SBU Xorg Fbdev Run smplayer remove -vo vaapi from Options → Preferences → Advanced → Options for MPlayer → Options: -vo vaapi Plus for smplayer you may now safely turn screenshots on. User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/xorg-ati-driver Kernel Configuration Enable the following options in the kernel configuration and recompile the kernel if necessary: Device Drivers ---> Graphics support ---> ATI Radeon: Y or M Kernel https://www.lordvan.com/drupal/node/59

radeon_drv.so is an Xorg video driver for ATI Radeon based video cards. If you need more information on Catalyst, visit this thread. Please note that Glamor acceleration can be used with other chips as well, from the R300 onwards, but it has not been tested recently. Troubleshooting If you can still boot to command-line, then the problem probably lies in /etc/X11/xorg.conf You can parse the whole /var/log/Xorg.0.log or, for clues: $ grep '(EE)' /var/log/Xorg.0.log $ grep '(WW)'

For the record I'm using Xorg 7.4 and Mesa 7.2 Monitor is a 15" Northgate Innovations EZX15G (though i seriously doubt the monitor is to blame for this) /var/log/Xorg.0.log doesn't update Write For Us! What distro are you using? 2. Now, to configure Catalyst.

See the Release notes, Xorg decoder ring or this table, to translate model names (HD2400, HD6990) to/from chip names (R600, Northern Islands respectively). Below is an example for Radeon HD6470, which is "Northern Islands" GPU with a network card that also requires the firmware: CONFIG_EXTRA_FIRMWARE="radeon/BTC_rlc.bin radeon/CAICOS_mc.bin radeon/CAICOS_me.bin radeon/CAICOS_pfp.bin radeon/CAICOS_smc.bin rtl_nic/rtl8168e-3.fw" CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware" Tip You can Now, as the root user: make install Contents Installed Xorg Driver: sis_drv.so Short Descriptions sis_drv.so is an Xorg video driver for SiS and XGI video cards. Ubuntu 8.10 has a 'forcevesa' option set in the bootloader and xorg uses the 'vesa' driver.

To enable catalyst-stable, follow the instructions for enabling catalyst and replace [catalyst] with [catalyst-stable] in pacman.conf. Warning: If you install the Catalyst package from the AUR, you will have to rebuild Catalyst every time the kernel is updated. Catalyst packages are no longer offered in the official repositories. Here is his script: #!/bin/sh libglx=$(/usr/lib/fglrx/switchlibglx query) modprobe acpi_call if [ "$libglx" = "intel" ]; then echo '\_SB.PCI0.PEG0.PEGP._OFF' > /proc/acpi/call fi Switching from X session to TTYs gives a blank screen/low

These resolutions have to be added in the "Screen" section: SubSection "Display" Depth 24 Modes "X-resolution screen 1xY-resolution screen 1" "Xresolution screen 2xY-resolution screen 2" EndSubSection From now on, instead of you can try this out The artifacting disappears when you transform one of the monitors by either rotating or scaling. The 'ati' driver pretty much had the same results as 'radeon' with one added side effect which i'll get to in a second. So you can use xrandr to fix this: xrandr --output HDMI1 --left-of LVDS1 --primary --scale 1x1 --output LVDS1 --scale 1.0001x1.0001 Xorg repositories Catalyst is notorious for its slow update process.

Start and enable the acpid service. http://tbapplication.com/ati-driver/ati-driver-xorg-conf.html Moreover with uvesafb it is also possible to set whatever resolution for the TTY. The drawback is that many aticonfig options rely on an xorg.conf, and will be unavailable. Build your package and install; run makepkg -i or makepkg followed by # pacman -U pkgname.pkg.tar.gz Note: If you run multiple kernels, you have to install the catalyst-utilsAUR packages for all

Now, as the root user: make install Command Explanations sed -e "/mibstore.h/d" ...: Fixes building with Xorg Server 1.14.0. Package Information Download (HTTP): http://people.freedesktop.org/~aplattner/vdpau/libvdpau-0.7.tar.gz Download MD5 sum: cb81b0c3b7d32b2b2a51894ef05b95ce Download size: 476 KB Estimated disk space required: 4.0 MB Estimated build time: 0.1 SBU libvdpau Dependencies Required Xorg Libraries Optional Doxygen-1.8.5, to /usr/share/applications/chromium.desktop file, like here: # cat /usr/share/applications/chromium.desktop | grep -i exec Exec=chromium%U --disable-gpu Xorg crashes Unsupported Xorg Version When having a supported Linux kernel version but an unsupported Xorg version, http://tbapplication.com/ati-driver/ati-driver-xorg-1-6.html These values are md5sums of the /usr/lib/modules//build/Module.symvers file (because I, Vi0L0, noticed that this file is unique and different for every kernel's release).

Privacy Policy | Term of Use | Posting Guidelines | Archive | Contact Us | Founding MembersPowered by vBulletin Copyright 2000 - 2012, vBulletin Solutions, Inc. Beyond Linux From Scratch - Version 7.4 Chapter24.X Window System Environment Prev Xorg-Server-1.14.3 Next printproto-1.0.5 Up Home Xorg Drivers Introduction to Xorg Drivers The Xorg Drivers page contains the instructions for Black screen with complete lockups and/or hangs after reboot or startx Ensure you have added the nomodeset option to the kernel options line in your bootloader (see #Disable kernel mode setting).

To see where you need to add this with other bootloaders, see #Disable kernel mode setting.

Now you should have a basic Xorg configuration file that you can edit to add your screen resolutions. In the AUR and the [catalyst] repositories you will find packages that represent the most important work from AMD, namely: amdapp-aparapiAUR amdapp-sdkAUR amdapp-codexlAUR APP shortcut stands for Accelerated Parallel Processing. You can try different versions of the file. These packages contain the so-called Catalyst-total packages and the beta versions: catalyst-totalAUR catalyst-total-hd234kAUR catalyst-testAUR The catalyst-totalAUR packages are made to make the lives of AUR users easier.

In compiz you need to set Redirected Direct Rendering in General Options of ccsm. This package is known to build and work properly using an LFS-7.4 platform. synaptics_drv.so is an Xorg input driver for touchpads. navigate here You will be asked for your root password to proceed to package installation.

To run two X servers at the same time (each using different drivers), you should firstly set up a fully working X with Catalyst and then move its xorg.conf to a The second method you can use is the AUR; PKGBUILDs offered here are also made by Vi0L0 and are the same he uses to built packages for his repository. The SDK provides samples, documentation and other materials to quickly get you started leveraging accelerated compute using OpenCL, Bolt, or C++ AMP in your C/C++ application. You can get the list of supported resolutions with the $ hwinfo --framebuffer command.

Download any firmware for your card which is named like: _rlc.bin, etc.