Will try to ssh or find another way to extract logs on hang on monday. See bug #614218. Power management is supported on all asics (r1xx-evergreen) that include the appropriate power state tables in the vbios; not all boards do (especially older desktop cards). "dpm" is only supported on Emachines running i386 126.96.36.199. http://tbapplication.com/ati-driver/ati-driver-linux-kernel-3-0.html
aufs-tools (1:3.2+20130722-1.1) Tools to manage aufs filesystems backfire-dkms (0.89-1) kernel module for signal benchmarking (DKMS) bbswitch-dkms (0.8-1) Interface for toggling the power on NVIDIA Optimus video cards bbswitch-source (0.8-1) Interface for Like Show 0 Likes(0) Actions Re: New legacy drivers? The "low" power state is selected when the monitors are in the dpms off state. If I forgot anything feel free to comment. https://help.ubuntu.com/community/RadeonDriver
Ctrl+Alt+Del just reboots the system, rather than pull up any kind of console, at least for me. On MUX-less systems, the discrete card is solely for rendering, not display. More bad mojo. Xv Attribute XV_VSYNC - This option prevents tearing when playing back videos using Xv by waiting to update the video image until scanout has passed the area of the screen displaying
Like Show 0 Likes(0) Actions Re: New legacy drivers? Stopping a cavalry charge by destroying the ground in front of it? I am going to try the updated kernel suggested. Petr Gladkikh (petrglad) wrote on 2013-04-13: #40 Dmesg of successful boot (after opening grub console) Edit (73.7 KiB, text/plain) If I open GRUB menu before booting sometimes kernel boots successfully (I
The contents of this document, unless otherwise expressly stated, are licensed under the CC-BY-SA-3.0 license. Please ask on #radeon if you want to get your feet wet on this. "UNKNOWN" means that the current status of this item isn't known. On pre-r6xx hardware, the thermal sensor was an external i2c chip, so you need to choose and load the appropriate i2c hwmon driver. https://community.amd.com/thread/160720 Think it may be the root cause.
Linux kernel 3.11 supports experimental DPM (Dynamic Power Management) and it has been enabled by default for kernel 3.13. Xorg radeon DDX - xorg : Driver/Radeon or Driver/AMDgpu Mesa 3D driver (1xx) - Mesa : Drivers/DRI/Radeon Mesa 3D driver (2xx) - Mesa : Drivers/DRI/r200 Mesa 3D driver (3xx-5xx) - Mesa Like Show 0 Likes(0) Actions Re: New legacy drivers? How can I make sure there is only one direct descendent over a thousand years? 3 rings vs 4 rings pistons: which design is better?
In a duplicate bug report, lots of people reported they have this issue on machines with older Radeon graphics cards, specifically: Radeon HD 3000 Series Radeon HD 4000 Series From reading http://www.upubuntu.com/2012/10/how-to-repair-failed-amd-catalyst.html The memory clock rises and remains high (like normal behavior). Confusion in fundamental theorem of calculus Why do many software developers violate the open/closed principle? root #echo "profile" > /sys/class/drm/card0/device/power_method Check the current profile: root #cat /sys/class/drm/card0/device/power_profile Change the profile: Options for profile: "default" no change of clock speeds "auto" switches between "mid" and "high" power
Which item gets your soul first, Blackrazor or a Ring of Mind Shielding? navigate here After rebooting the system to desktop, force the power profile to "low". (This can also be automated by creating a /etc/local.d/* script): root #echo "low" > /sys/class/drm/card0/device/power_profile Limitation: For my KDE As an alternative, you can install a newer release of Ubuntu. For older kernel, apply this kernel patch: http://www.spinics.net/lists/dri-devel/msg52745.html 18 LLVM 3.9 and Kernel 4.7 required 19 OpenGL 4.1 is currently only supported on CYPRESS, CAYMAN and ARUBA.
To check default values look at drivers/gpu/drm/radeon/radeondrv.c_ in Linux kernel source. but still I don't understand why on the AMD website it says it supports Ubuntu 12.04.3, 12.04.4 and 13.10 and not also 14.04 since it supports kernel 3.13 Thanks! –Daniel May Today we will focus on AMD drivers in which we will see two methods for fixing an incompatible driver installation of AMD Catalyst driver (12.x) that resulted in system crash, graphics http://tbapplication.com/ati-driver/ati-driver-kernel-2-6-27.html amdgpu-pro (Crimson) - A closed source component for amdgpu cards.
Use sys-kernel/linux-firmware instead unless you have a very good reason not to. more stack exchange communities company blog Stack Exchange Inbox Reputation and Badges sign up log in tour help Tour Start here for a quick overview of the site Help Center Detailed The new DPM code lets the GPU to tune clocks and voltages based on work load which should provide tear free and less power hungry experience for your laptop like FGLRX
DSL modem chips firmware-atheros (0.43) [non-free] Binary firmware for Atheros wireless cards firmware-b43-installer (1:019-2) [contrib] firmware installer for the b43 driver firmware-b43legacy-installer (1:019-2) [contrib] firmware installer for the b43legacy driver firmware-bnx2 Johnson (gruyere-emmentaler) wrote on 2013-04-10: Re: Linux 188.8.131.52.43 does not boot #3 I have the same issue - on a desktop computer. setting gfxpayload to text and removing quiet spash $vt.handoff On the not successful boot, the screen remains black. When I tried the 3.5.0-27 failsafe kernel, I get partways through the boot cycle but it just hangs at pretty much the exact same point every time.
It should detect and configure devices such as displays, keyboards, and mice. With the fglrx-legacy driver I was able to run Steam games on this card, now I cant even run LibreOffice. Thanks! I noticed that the network card never initialized itself (the light on my router never changed from yellow to green).
The keyboard had enough functionality so that the NumLock light would respond to pressing that key. For Ubuntu 16.04 LTS with Linux kernel 4.4, AMDGPU-Pro hybrid driver is also available to download here (please read the release notes for known problems and limitations). B53S MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb 1 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-26-generic root=/dev/mapper/ubuntu-root ro quiet splash PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: It only prevents tearing if Xv is rendering directly to the front buffer.
Check the current GPU, Memory clocks and voltage (needs to have kernel debugfs enabled): root #cat /sys/kernel/debug/dri/0/radeon_pm_info NoteWith more than one monitor connected, the memory clock will NOT be on full What stops us from creating nuclear fusion reactor as we already have hydrogen bomb working on same principle of fusion?