Home > Ati Driver > Ati Driver Installer 8.41 7 X86 X86_64

Ati Driver Installer 8.41 7 X86 X86_64

After installing any driver version I either boot into the Linux (gnome) desktop, but fglrxinfo says mesa, or I get a black screen and hard locked computer (have to use the Frank Golden Acer Aspire as5672WLMi, Core 2 Duo Merom (T7200/2.0 GHz) Centrino, 500 GB Seagate Momentus 7200 rpm (SATA) HDD,   4 GB Corsair DDR2-PC5300 ram, ATi Radeon X1400 (128 MB built-in X wil gelijk niet meer starten, dus zit nu nog met de vesa driver Dit terwijl ik netjes alle instructies opgevolgd heb. Spannend, en tegelijkertijd harde tijden voor de non-believers 0 StGermain @zenlord • 14 september 2007 11:42 Met Ubuntu Feisty Fawn heb ik op 4 verschillende laptops met 4 verschillende wireless netwerkkaartjes have a peek here

ATI Radeon HD 2400/HD 2600/HD 2900 Display Driver 8.41.7 Linux x86 was collected from ATI Technology official site for ATI Technology Graphics and Video. Frank Golden Acer Aspire as5672WLMi, Core 2 Duo Merom (T7200/2.0 GHz) Centrino, 500 GB Seagate Momentus 7200 rpm (SATA) HDD,   4 GB Corsair DDR2-PC5300 ram, ATi Radeon X1400 (128 MB built-in I don't need 3d acceleration but I would like something better/faster than the Vesa driver. Er is geen ATI Catalyst Linux driver. +1 tuXzero @jealma • 13 september 2007 20:52 Ik werk nu op mijn Ubuntu Linux laptop met ATI kaart en raar genoeg staat er http://mirror74.boot-keys.org/Soft/_Drivers/ATI/Linux/

This page was generated at 02:15 AM. anyway... Username Forum Password I've forgotten my password Remember me This is not recommended for shared computers Sign in anonymously Don't add me to the active users list Privacy Policy Ubuntu Forums

Thanks again for any help!! Does anybody have a method that they know for a fact works with this card and driver? mjpolifkaSeptember 18th, 2007, 09:30 PMOn a fresh install, I downloaded the newest version (8.40), ran sudo sh ./ati-driver-installer-8.40.4-x86.x86_64.run sudo aticonfig --initial --force rebooted, and now everything works. display: :0.0 screen: 0 OpenGL vendor string: Mesa project: www.mesa3d.org OpenGL renderer string: Mesa GLX Indirect OpenGL version string: 1.4 (1.5 Mesa 6.5.2) tonbuntuSeptember 15th, 2007, 07:47 AMI have the x300

I've read around a bit but just ended up confused as to why I still can't get the ATI info displayed. :( Harry789September 18th, 2007, 01:28 AMbootsbradford, I have the exact http://ubuntuforums.org/showthread.php?p=3433396#post3433396 JuleshuSeptember 27th, 2007, 03:22 PMI tried this method: Instructions for 7.04 (Feisty) Note: If you use Kubuntu then follow the instructions for 6.10 (Edgy)-- * Install linux-restricted-modules and restricted-manager provied CD Installer; Menus (mostly) with .ani cursor fix mentioned by other users Core aspects of gameplay (driving/piloting vehicles sudo ./ati-driver-installer-8.41.7-x86.x86_64.run --buildpkg Ubuntu/feisty. 7.- Instalar los paquetes generados con sudo dpkg -i Again, not sure why I've read pages and pages of wiki instructions but this was never proposed.

Thanks in advance .evanSeptember 12th, 2007, 10:58 PM[QUOTE=kaktuskatta;3352756]I have the drivers successfully installed, but I'm only able to get the correct info from fgrlxinfo when I run the command as superuser! Waar je anders een update of 5,6 per jaar kreeg voor de linuxdrivers, is dit nu al de tweede op twee weken tijd, en telkens met substantiële toevoegingen... DoneBuilding dependency tree Reading state information... I'm glad it worked for you.

If you are go to system>administration>Restricted Driver Managerand uncheck (remove) the entry for the ATi driver. I am an HD 2900 owner who drifted off Linux for a while when I upgraded cards, but I am trying to get back into it now that 8.41 is available. Besides, Both the driver developer's home page and driver download and support page be provided as well in my ATI Technology page. I did have to uncheck the original Ubuntu installed driver (read that as remove) and reboot when I installed the earlier 8.39.4 driver (I did not install the 8.40.4 driver as

It might help if you still get 'DRI missing' errors. http://tbapplication.com/ati-driver/ati-driver-installer-8-42-3-x86-x86-64-run.html At that point my screen is black, but my monitor detects a signal on whatever port I have it plugged into and it doesn't go into power save mode. In order to disable Composite you have to edit the xorg.conf file:gksu gedit /etc/X11/xorg.confand add these lines at the end of the file:File: /etc/X11/xorg.confQuoteSection "Extensions"Option"Composite" "Disable"EndSectionSection "ServerFlags"Option"AIGLX" "off"EndSectionMethod 2: Install the Hopefully the anouncement of AMD/ATi releasing it's source code to developers will eliminate such crap in the future.At the very least it will remove an excuse the linux community has used

My card is the ATI Radeon 9550 (x8 AGP) ... he spend a few days trying to figure out why he was getting the same error message as Iaan, and kept getting it until he had to go through the Restricted Reboot and you should have DRI enabled and fglrxinfo should show the ATi driver and not the Mesa driver. Check This Out The AMD 8.41.7 driver was the Is there any chance to get compiz running with the official ati driver? 13.1-linux-x86.x86_64.zip unzip amd-driver-installer 8.41.7 fglrx drivers boss bengali movie 3gp video songs

Daarnaast heeft men ook driftig gesleuteld aan prestatie verbeteringen voor OpenGL. All rights reserved. so disable for now #/usr/bin/aticonfig --initial &>/dev/null || : # Add to DKMS registry dkms add -m %{dkms_name} -v %{dkms_vers} %{?quiet} || : # Rebuild and make available for the currenty

Reklama zamknie siÄ™ za 15 sekund.

and enable VT1 as normal text as it was on the old distr 2014 at 8:41 am: 20ati-driver-installer-8.41.7-x86.x86_64.run Taille du fichier 48,8 Mo Langue Anglais Date de publication sur TousLesDrivers.com Jeudi Bij de nieuwe krijg ik echter hele andere output, niet zomaar een 'normale' error aangegeven met EE maar een hele lap code. 0 Terror 13 september 2007 23:39 Hopelijk krijg ik Please setup and update your driver from the download to start or reboot your device. Frank Golden Acer Aspire as5672WLMi, Core 2 Duo Merom (T7200/2.0 GHz) Centrino, 500 GB Seagate Momentus 7200 rpm (SATA) HDD,   4 GB Corsair DDR2-PC5300 ram, ATi Radeon X1400 (128 MB built-in

All times are GMT-5. I've done it so many times I can almost do it in my sleep. The problem I have is installing any driver downloaded from ati's site. this contact form By the way, is there another driver that's better than the standard Vesa driver and will work with the ATI radeon video cards?

Thanks, Tim Lolo UilaSeptember 24th, 2007, 06:06 AMOkay, I'm back to an install that I can boot, but mesa is being used instead of fglrx. /var/log/Xorg.0.log now shows some (EE) error Sure would be nice to not have to manually compile a fglrx kernel module everytime there is a major kernel upgrade. In my xorg.conf (posted below), I have a default bit depth. # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Clarke Back to top #23 OFFLINE laan97ac laan97ac Message Mogul Members 382 posts Posted 18 September 2007 - 09:18 PM Frank, I will try the above, but just to make

In de vorige versie van Ubuntu heb ik nog een halve dag zitten zwoegen om op een Dell D410 wireless aan de praat te krijgen maar dat probleem is sinds Feisty Another alternative is aticonfig --initial --force if you encounter issues with the first command. Section “Device” # Crucial to give each Device a unique ID Identifier “0 ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)” Driver “fglrx” # In my case, there’s only one I'm beginning to think the ATI driver doesn't support the AGP X1k cards (which are actually PCI-E cards with a bridge chip).

Automatically Detect and Install Your Driver Windows 7 (64-bit). Also make sure the "composite" extension is disabled as outlined at the top of page. For the sake of completion and system comparison.... Currently lsmod | grep fglrx returns nothing fglrxinfo returns: Xlib: extension "XFree86-DRI" missing on display ":0.0".

Edited by Frank Golden, 12 September 2007 - 05:56 PM. All rights reserved. tried both the fglrx restricted driver from the ubuntu repositories and the one from ATI ( x86 8.40.0). Aloha, Tim Lolo UilaSeptember 24th, 2007, 07:06 AMSo basically it looks like whenever fglrx loads without errors (well, without logged errors) I get hard locked when X is started.

if this helps, this is what 'lspci' returns about my card VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 thanks in advance for any help pdusenSeptember 21st, 2007, 04:03 AMHelp