Home > Ati Driver > Ati Driver Installer 8.21 7 I386

Ati Driver Installer 8.21 7 I386

build-essential est déjà la plus récente version disponible. 0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour. If you need support, post the topmost build error, and the call stack if > > relevant. > > > > Hi, > > ati-drivers-8.25.18 works fine with gentoo-sources-2.6.17-r4 > Hello! I will test some other things, when my semester starts again in october, maybe i will find something. Ich denk mir mal, das der Fehler bei der dick-markierten Zeile anfängt und so wie ich das rauslese der agp-port benutzt wird??? http://tbapplication.com/ati-driver/ati-driver-installer-8-23-7-i386.html

Update - although X will come up in kernel 2.6.15 with the fglrx drivers patched as above, there is some strange behavior exhibited in all of X apllications - frequent hanging However, in the first system, emacs doesn't respond to any key stroke when started with GUI interface, but it works well with "emacs -font fixed". done! >>> Emerging (1 of 1) x11-drivers/ati-drivers-8.21.7-r1 to / >>> checking ebuild checksums ;-) >>> checking auxfile checksums ;-) >>> checking miscfile checksums ;-) >>> checking ati-driver-installer-8.21.7-i386.run ;-) * Determining the No idea about 8.21.7 though, because I switched to 2.6.16-rc1 and can't compile the fglrx module at the moment, need to investigate the cause. --spiney 07:24, 21 January 2006 (CET) Ok https://lists.gt.net/gentoo/user/133628

There are maybe some other configurations which don't give you this possibilty... I was looking for a solution for my problem, but i don't find anything about it, so maybe i'm doing something wrong. Enfin rééditez la blacklist: $ sudo nano -w /etc/hotplug/blacklist #Enlevez snd-hda-intel Un dernier redémarrage et voilà, votre système est enfin opérationnel! done! > > [ebuild R ] x11-base/xorg-x11-6.8.2-r8 USE="bitmap-fonts dlloader ipv6 > > nls opengl pam truetype-fonts type1-fonts xv -3dfx -3dnow -cjk -debug -dmx > > -doc -font-server -insecure-drivers -minimal -mmx* -nocxx

And I found this in the log file: (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): Fait Construction de l'arbre des dépendances... Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden. Call stack: ebuild.sh, line 1539: Called dyn_install ebuild.sh, line 1013: Called src_install ati-drivers-8.21.7-r1.ebuild, line 182: Called linux-mod_src_install linux-mod.eclass, line 497: Called die !!!

Section "Module" ... # vérifier la présence de ces lignes ou ajoutez les : Load "GLcore" Load "glx" Load "dri" ... #Ajouter ces 3 lignes à la suite des "Load" : Thanks, István -- [email protected] mailing list Re: can't install ati-drivers - SOLVED [ In reply to ] stefi at geohidroterv Jul26,2006,5:08AM Post #16 of 16 (603 views) Permalink szerda 26 július 2006 13.47 ERROR: x11-drivers/ati-drivers-8.21.7-r1 failed. Ensuite, taper en console: $sudo apt-get install qsynaptics Editer le fichier de configuration de xorg: $sudo gedit /etc/X11/xorg.conf Et ajouter à la ligne correspondant au touchpad: Option "ShmConfig" "true" Enregistrer et

done! > > >>> Emerging (1 of 1) x11-drivers/ati-drivers-8.21.7-r1 to / > > > > make: Leaving directory `/usr/src/linux-2.6.17-gentoo-r4' > > * DRM module not built > > >>> Source compiled. i will thank you! OpenGL renderer string: MOBILITY FireGL V3200 Pentium 4 (SSE2) (FireGL) (GNU_ICD) OpenGL version string: 1.3.5519 (X4.3.0-8.20.8) --spiney Ahh - thanks for the info. Full listing at http://packages.debian.org/unstable/x11/fglrx-driver which lists as required packages: xserver-xorg (<< 6.8.99) the X.Org X server xserver-xorg (>= 6.8.0) The first limitation (<<6.8.99) is what prevents installation.

doins fglrx.ko failed > !!! useful source Linux life is good.) --gsmenden 12:39, 9 Feb 2006 (EST) I don't know which patch you mean exactly (10 lines? All activity stops. Nouveau sur linux c'est bon, j'avais pas vu qu'il fallait installer le module-assistantJe vous tiens informé Hors ligne #6 Le 28/01/2006, à 13:56 Phoen1x Re: Installation driver ati.

I can't reproduce them too consistently, but these _never_ occur with the radeon driver / mesa or under 2.6.14.x. http://tbapplication.com/ati-driver/ati-driver-installer-8-18-8-i386.html glxgears and fgl_glxgears work fine, netscape occasionally will hard-lock, and strangely enough issuing a shutdown command often makes the display blank and hard lock. I wanna desperately get DRI working so that i can get desktop effects and smooth video playback.What could be the issue? Main Menu LQ Calendar LQ Rules LQ Sitemap Site FAQ View New Posts View Latest Posts Zero Reply Threads LQ Wiki Most Wanted Jeremy's Blog Report LQ Bug Syndicate Latest

But on the mm Series it doesnt run since 2.6.15.4-mm4. Ajoutez a votre fichier /etc/apt/sources.list: deb http://xoomer.virgilio.it/flavio.stanchina/debian-fglrx-modules/ / # si vous avez xorg (la debian testing actuelle utilise xorg) : deb http://xoomer.virgilio.it/flavio.stanchina/debian-fglrx-xorg/ / # OU si vous avez xfree86 (debian sarge) Tapez alors dans un terminal: $ sudo apt-get install gcc-3.4 g++ build-essential Ces outils vous permettront de compiler les installations des drivers. Maintenant nous allons créer le répertoire où nous http://tbapplication.com/ati-driver/ati-driver-installer-8-23-7-i386-run.html And, again SORRY, i'm not here everyday Btw.

done! > > [ebuild R ] x11-base/xorg-x11-6.8.2-r8 USE="bitmap-fonts dlloader ipv6 > > nls opengl pam truetype-fonts type1-fonts xv -3dfx -3dnow -cjk -debug -dmx > > -doc -font-server -insecure-drivers -minimal -mmx* -nocxx It also reports unknown symbol verify_area, but this should not pose a problem, as it is already obsolete and redundant. Dort wird Ihnen die Bedienung dieser Seite näher erläutert.

Que dois-je faire pour régler mon problème svp.

Required symbol drmMap from module /usr/lib/modules/drivers/fglrx_drv.o is unresolved! Fatal server error: Some required symbols were unresolved Anyway, it is the newest portage, I installed Gentoo today on this laptop. I think this has to do with the total resolution of 1400x1050 + 1280x1024, since i remember it working fine before i added big-desktop. I have no idea, how it is possible that it works for other people with 2.6.15, perhaps when you install precompiled modules? Hätte da jemand nen Tip zur Hand??

But I don't know which switches could do that, what you need... Putting the mouse to the bottom cause a vertical blur. I have been having this strange problem with the closed source ATI proprietary fglrx drivers. this contact form So don't pass the vga=...

Please somebody help. > > > > When I try to install it I get a huge error message: > > > > localhost fglrx # emerge -v ati-drivers > > Si vous n'avez rien changé vous devriez avoir: 2.6.12-10-386 Sinon si vous avez changé le kernel, vous avez sûrement: 2.6.12-10-686 Selon le kernel faites: #Kernel 2.6.12-10-386 : $sudo apt-get install Introduction to Linux - A Hands on Guide This guide was created as an overview of the Linux Operating System, geared toward new users as an exploration tour and getting started Uncompressing ATI Proprietary Linux Driver-8.21.7.............................................................................................. .................................................................................................... .................................................................................................... ....................................................................... ================================================== ATI Technologies Linux Driver Installer/Packager ================================================== Detected configuration: Architecture: i686 (32-bit) X Server: Xorg 6.9.0 little window popped i chose install drivers

module-assistant est déjà la plus récente version disponible. Fait linux-headers-2.6.12-9-386 est déjà la plus récente version disponible. pm_register and similar were moved to linux/pm_legacy.h in 2.6.15, so that's one problem. It might help to gzip and attach your full /var/log/Xorg.0.log file. -Richard -- [email protected] mailing list Re: can't install ati-drivers [ In reply to ] stefi at geohidroterv Jul25,2006,10:59PM Post #12 of 16

Symbol vgaHWGetIndex from module /usr/lib/modules/drivers/fglrx_drv.o is unresolved! Call stack: ebuild.sh, line 1539: Called dyn_install ebuild.sh, line 1013: Called src_install ati-drivers-8.21.7-r1.ebuild, line 182: Called linux-mod_src_install linux-mod.eclass, line 497: Called die !!! In the second system, Emacs displays all characters as empty rectangles and responds to all key strokes althouth they are illegible. You'll > have to accept the ~arch keyword for this: > > echo "x11-drivers/ati-drivers ~x86" >>/etc/portage/package.keywords > Please find my answers in my previous answer for Andrew's mail.

Anybody else with this problem? I haven't found any other X applications affected by the use of the driver. --Bitcalc 04:02, 30 May 2006 (CEST) atieventsd With driver version 8.25.16, I noticed a blinking of the If I disconnect the second monitor, restart xorg and comment "EnablePrivateBackZ" "yes" option, all works fine, but that is not the solution because i want to use the second monitor I after that you can re-instate it. -- Regards, Mick Re: can't install ati-drivers [ In reply to ] stefi at geohidroterv Jul25,2006,12:35PM Post #9 of 16 (602 views) Permalink kedd 25 július 2006

Ey guys, i need help Thanks again... If you'd like to contribute content, let us know. Thanks and Greets Oli Have a look at the (currently) last entry on http://www.rage3d.com/board/showthread.php?t=33847019, which explains how to revive the old inter_module routines. Required symbol vgaHWUnlock from module /usr/lib/modules/drivers/fglrx_drv.o is unresolved!